₹74,992.50 x 1
₹21,749.25 x 1
₹18,742.50 x 1
₹58,499.25 x 1
₹349,999.00 x 1
Total:₹523,982.50
₹74,992.50 x 1
₹21,749.25 x 1
₹18,742.50 x 1
₹58,499.25 x 1
₹349,999.00 x 1
Total:₹523,982.50
₹224,999.00
The BRAX MATRIX ML8 SUB is a high-performance 8.7” car subwoofer engineered for precise, dynamic, and controlled bass. With a dual 2 x 2 Ohm voice coil and patented MicroSphere-coated paper cone, it delivers exceptional impulse response and low-frequency accuracy, even in compact enclosures.
The BRAX MATRIX ML8 SUB extends the legendary MATRIX series with a premium, compact subwoofer that reproduces deep bass with maximum precision and minimal distortion. Designed for audiophiles seeking uncompromising low-frequency performance, this subwoofer converts high amplifier power into clean, dynamic sound without compression.
Its secret lies in the MicroSphere-coated paper cone, which embeds 75 µm ceramic hollow spheres in a polymer layer. This combination provides maximum stiffness and inner damping, ensuring precise impulse response while keeping the cone lightweight.
With a dual 2 x 2 Ohm voice coil, the ML8 SUB allows high linear excursion, flexible wiring options, and low distortion, while its aerodynamically optimized diecast aluminum basket and precision-machined magnet system maintain structural integrity and flux linearity. Its design follows the timeless BRAX aesthetic, delivered in a premium wooden box with a unique serial number.
| Specification | Details |
|---|---|
| Power RMS / Max | 400 / 800 W |
| Impedance | 2 x 2 Ω |
| DC Resistance (Re) | 2 x 1.9 Ω |
| Resonance Frequency (Fs) | 32 Hz |
| Mechanical Q (Qms) | 9.63 |
| Electrical Q (Qes) | 0.60 |
| Total Q (Qts) | 0.56 |
| Compliance (Cms) | 323 µm/N |
| Equivalent Air Volume (Vas) | 22 L |
| Force Factor (B*I) | 10.3 Tm |
| Efficiency (1 W / 1 m) | 85 dB SPL |
| Cone Area (Sd) | 219 cm² |
| Moving Mass (Mms) | 83 g |
| Cone Material | Paper cone with MicroSphere coating |
| Mechanical Resistance (Rms) | 1.67 kg/s |
| Voice Coil Diameter | 50 mm / 2.0″ |
| Voice Coil Winding Height | 26.4 mm / 1.0″ |
| Max Linear Excursion (Xmax) | ±9.2 mm |
| Outer Diameter | 222 mm / 8.7″ |
| Installation Diameter | 191 mm / 7.5″ |
| Installation Depth | 95.6 mm / 3.8″ |
| Enclosure Type | Net Volume | Lower Limiting Frequency (-3 dB) | DSP Highpass Filter |
|---|---|---|---|
| Optimal | 17 L | 43 Hz | Frequency: 32 Hz, Q-Factor: 1.0, Characteristic: Self-define |
| Minimal | 10 L | 48 Hz | Frequency: 35 Hz, Q-Factor: 1.0, Characteristic: Self-define |
Note: Sealed box volumes refer to unfilled cabinets. Volume can be reduced with damping materials:
Reviews
There are no reviews yet.